Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Using your Revolution VT60
If the Revolution VT60 is used in temperature controlled mode with coil material that is not
capable of temperature sensing, it will immediately drop back into power control mode.
Press three
Press once
You may need to adjust power down with the output adjuster to avoid burning your non-VT
times to enter
to select your
coil if this happens.
setup mode
preference
The bottom menu item (selected by pushing the output adjuster to the left three times)
specifies the display options for the lowest position, with the following options available:
Battery charge remaining (%)
Puff counter
Total vaping time (seconds)
Pressing the power button once confirms the selection and returns the Revolution VT60
to normal operating mode. Holding down the power button while the time or puff counter
mode is still flashing will reset the vaping time or puff counter records.
10
11
Downloaded from
www.Manualslib.com
manuals search engine
Werbung
Inhaltsverzeichnis
