Totally Wicked Revolution VT60 Handbuch Seite 3

Using your Revolution VT60
Power on and off: Press the power button 5 times in quick succession, the OLED Screen
will light to indicate the Revolution VT60 is on and ready to use. In the same way, to turn
the Revolution VT60 off, press the power button 5 times in quick succession. When
the Revolution VT60 is on, the screen will turn off after 30 seconds of inactivity, but will
seamlessly recover when the power button is pressed.
To fill the tank: Invert the tank and unscrew the atomizer base. Fill the tank through the
narrow gap between the central tube and the outer casing, being careful not to allow fluid to
enter the central tube. Prime the cotton of the new atomizer head with a few drops of e-liquid
to ensure the priming process has started. Once the atomizer base is re-inserted into the
filled tank, invert the tank once again to allow the atomizer coil to become submerged in the
e-liquid. Leave to soak for five minutes to ensure the wicking material is fully soaked.
Vaping: Press the power button* as you inhale. When the button is held down, the OLED
Screen will be illuminated, and will show the temperature, power and base atomizer
resistance, as well as a fourth user-selectable parameter.
* Refer to page 8 prior to commencing use of the Revolution VT60 in order
to select the correct setting for the atomizer type being used
4
Downloaded from www.Manualslib.com manuals search engine
Press the power button
5 times to switch on/off
5