BestWater Jungbrunnen 33-00 ULTIMATE Handbuch Seite 56

Maintaining the BestWater System
En
First unscrew the screwcap on the
pipe.
Remove the pipe of the faucet.
Note: There may still be water
inside the faucet that can drip
out when removing the pipe.
Once the faucet has been disas-
sembled you will find the following
pieces: pipe with O-ring seals, the
vitalising stainless steel coil, and
a support ring. These parts will be
placed back into the faucet after
disinfection.
56
Downloaded from www.Manualslib.com manuals search engine
Pour some disinfecting gel into the
underside of the pipe.
Insert the pipe cleaner provided into
the pipe.
Insert the pipe cleaner down to the
end of the pipe. Insert and withdraw
the pipe cleaner numerous times
back and forth. This ensures that
the disinfectant is spread evenly
throughout the pipe.
Reset the pipe and the vitalising
stainless steel coil, with seal, back
into the faucet socket. Then screw
the screwcap finger-tight back onto
the pipe socket.
Let about 7 - 10 litres of water flow
through the faucet to rinse out the
remaining disinfectant.