BestWater Jungbrunnen 33-00 ULTIMATE Handbuch Seite 45

The hose connections
Use these images to install the hose
connections onto the Jungbrunnen
33-00 ULTIMATE, and follow these
steps:
Insert the plug sockets into the
bulkhead connector on the bottom
side of the Jungbrunnen 33-00 UL-
TIMATE.
Insert the 1/4" plastic hoses into
the plug sockets of the Jungbrunnen
33-00 ULTIMATE one after another.
Downloaded from www.Manualslib.com manuals search engine
Setting Up and Connecting
The white mains water hose is in-
serted to the right in connector A.
The red drain hose is inserted into
connector B, and the
fied water hose into connector C.
Once all plastic hoses have been
connected to the bottom side of
the Jungbrunnen 33-00 ULTIMATE,
insert the yellow purified water hose
into the faucet connector IT.
The red drain hose is inserted from
the system into the drain clamp on
the trap.
Push the plastic hose 30 mm into
the drain clamp connector.
No additional fittings (depressurisers,
check valves, etc.) may be installed
on the hose to the drain clamp.
En
yellow puri-
45