BestWater Jungbrunnen 33-00 ULTIMATE Handbuch Seite 44

Setting Up and Connecting
En
Fasten the clamp to the trap. Turn
the screws equally among the drain
installation kit.
The water stopper
Follow these steps to connect the
water stopper:
Open the rear battery case of the
water stopper.
Insert one AA battery into the water
stopper. Change this battery after
each filter change, or once per year.
44
Downloaded from www.Manualslib.com manuals search engine
Close the rear battery case again
and screw the 1/4" connector IT
onto the water stopper.
Screw the water stopper onto the
3/4" Y-distributor. A washing ma-
chine or dishwasher can also be
connected to the Y-distributor. The
water stopper is only applied finger-
tight.
Make sure that the contaminant
filter is installed in the water
stopper.
Mount the Y-distributor with the wa-
ter stopper onto the corner valve of
your cold water connection and ple-
ase place the water stopper sensor
in the deepest part of your built-in
cupboard.