BestWater Jungbrunnen 33-00 ULTIMATE Handbuch Seite 41

The extraction faucet
Find out where you will assemble
the unit before installing the faucet.
In doing so, note the following:
The faucet should be in a location
●
where it is easy to use. Please note
the turning direction of the fitting
you are using.
Consider the feasibility of assem-
●
bly and connection beneath the
sink.
Use drill bit sizes 3 mm, 7 mm, and
12 mm for the opening in the tab-
letop or sink surface. Start with the
smallest diameter and lower rotati-
on, and slowly increase these.
Downloaded from www.Manualslib.com manuals search engine
Setting Up and Connecting
Rework the opening with the round
file and remove any residue. When
washing stone (marble, granite,
etc.) please adhere to the pertinent
drilling requirements.
Place the faucet in the drill hole on
the sink surface.
Use the image (page 42) for assis-
tance when installing the faucet and
follow these steps:
Insert the included parts onto the
●
threaded tube in the proper order.
Line up the faucet.
●
Fasten the faucet.
●
En
41