Network Setup - Wiseup AT003 Handbuch

3.1. Please make sure the Micro SD card has been formatted already and is securely fitted into
the camera's SD card slot, or it will not work. We recommend you to use a SDHC Class 10
Micro SD card.
3.2. Power on the camera by pressing the Power Button for 3 seconds. When the WIFI indica-
tor keeps flashing slowly, it means the camera's WIFI signal is ready.
3.3. If you need the camera to work 24/7 days, please plug it into an outlet power supply using
the included USB cable and power adapter.
IV. Network Setup
4.1. Install the "Camwf" APP on Android Smartphone or Tablet PC
Scan the QR code below to download the "Camwf" APP on your Android smartphone or tablet
PC.
4.2. P2P Connection Setup (LAN Mode)
4.2.1. Go to the WIFI Setting page on your phone or mobile device, connect to the camera's
WIFI signal named "RT-**********". Wait for the WIFI to be connected and your phone status bar
will appear WIFI symbol as below:
[Note]:
If the camera's WIFI signal cannot be found after a long time, please see Q1 on the FAQ page
at the end of this user guide for detailed solutions.
Downloaded from www.Manualslib.com manuals search engine