Wiseup AT003 Handbuch Seite 12

and keep dropping. Plus, we don't recommend you connect the camera directly to your PC
computer for charging, because the current output will not be enough for the camera to run nor-
mally.
Q6: The camera is not holding my Wifi settings and continues to show that the camera
is offline?
A6: Make sure the camera is inside the range of good WIFI signal. Or check if the power adapt-
er is connected properly for long time use.
Q7: Will the camera still work if the power goes out?
A7: If the camera is in P2P (LAN) mode, the camera can still work and record video as long as
the backup battery provides power for the camera to run. If the camera is in WAN mode, it will
not work until power is restored and the Internet access is available.
Q8: How to add the camera to more devices?
A8: Make sure that camera is in WAN mode already. Then launch the "Camwf" APP on your
other Android devices, tap "+" icon, scan the QR code on the back of the camera for camera's
UID and password. Or input the camera UID (a unique combination of numbers and letters spe-
cific to your camera) and password. Finally, tap "OK" to add the camera to the APP.
Q9: What to do if I forget my password?
A9: You will have to reset the device to factory settings (See VIII) and re-add the camera.
Q10: The camera does not record any video to the Micro SD card?
A10: Power off the camera, take out the Micro SD card, format the SD card, then insert it to the
SD card slot to try again.
Q11: How many mobile devices can connect to the camera at the same time?
A11: No limit.
Q12: How many cameras are supported on the mobile application?
A12: No limit.
Q13: How to play back the video saved in the Micro SD card?
A13: Use a card reader to read and play back the video on your PC computer. Or use the
"Camwf" APP to play back (See 7.5)
Downloaded from www.Manualslib.com manuals search engine