AEG BP630302I Benutzerinformation Seite 25

7. Put the door on a soft cloth on a
8. Release the locking system to
9. Turn the two fasteners by 90° and
Downloaded from www.Manualslib.com
stable surface.
remove the glass panels.
remove them from their seats.
90°
manuals search engine
10. First lift carefully and then remove
the glass panels one by one. Start
from the top panel.
1
11. Clean the glass panels with water
and soap. Dry the glass panels
carefully.
When the cleaning is completed, install
the glass panels and the oven door. Do
the above steps in the opposite
sequence.
Make sure that you put the glass panels
(A, B and C) back in the correct
sequence. The middle panel (B) has a
decorative frame. The screen-printing
zone must face the inner side of the
door. Make sure that after the installation
the surface of the glass panel frame (B)
on the screen-printing zones is not rough
when you touch it.
A B C
Make sure that you install the middle
panel of glass in the seats correctly.
ENGLISH 25
2