Specifications; Safety Warnings - Makita CP100D Betriebsanleitung

ENGLISH (Original instructions)

SPECIFICATIONS

Model:
No load speed
Overall length
Rated voltage
Standard battery cartridge
Charger
Net weight
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications and battery cartridge may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Intended use
The tool is intended for cutting flexible, soft materials up
to 6 mm in thickness, such as carpet, cardboard, and
similar materials. The tool is also intended for cutting
CD, DVD, and Blu-ray Disc.
Noise
The typical A-weighted noise level determined accord-
ing to EN62841:
Sound pressure level (L
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).
WARNING:
Vibration
The vibration total value (tri-axial vector sum) deter-
mined according to EN62841:
Work mode: Cutting cardboard
Vibration emission (a
Uncertainty (K) : 1.5 m/s
NOTE: The declared vibration emission value has
been measured in accordance with the standard test
method and may be used for comparing one tool with
another.
NOTE: The declared vibration emission value
may also be used in a preliminary assessment of
exposure.
WARNING:
use of the power tool can differ from the declared
emission value depending on the ways in which the
tool is used.
WARNING:
to protect the operator that are based on an estima-
tion of exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it is
running idle in addition to the trigger time).
Downloaded from www.Manualslib.com
) : 70 dB(A) or less
pA
Wear ear protection.
2
) : 2.5 m/s or less
h
2
The vibration emission during actual
Be sure to identify safety measures
manuals search engine
300 min
D.C. 10.8 V - 12 V max
BL1015 / BL1016 / BL1020B / BL1021B / BL1040B / BL1041B
DC10SA / DC10SB / DC10WC / DC10WD
0.72 - 0.88 kg
EC Declaration of Conformity
For European countries only
The EC declaration of conformity is included as Annex A
to this instruction manual.

SAFETY WARNINGS

General power tool safety warnings
WARNING:
Read all safety warnings, instruc-
tions, illustrations and specifications provided with this
power tool. Failure to follow all instructions listed below
may result in electric shock, fire and/or serious injury.
Save all warnings and instruc-
tions for future reference.
The term "power tool" in the warnings refers to your mains-oper-
ated (corded) power tool or battery-operated (cordless) power tool.
Cordless multi cutter safety
warnings
1. Hold the power tool by insulated gripping surfaces,
when performing an operation where the blade may
contact hidden wiring. Blade contacting a "live" wire
may make exposed metal parts of the power tool "live"
and could give the operator an electric shock.
2. Hold the tool firmly.
3. Do not touch the blade or bring the tool near
the hand or face.
SAVE THESE INSTRUCTIONS.
WARNING:
DO NOT let comfort or familiarity
with product (gained from repeated use) replace strict
adherence to safety rules for the subject product.
MISUSE or failure to follow the safety rules stated in this
instruction manual may cause serious personal injury.
4 ENGLISH
CP100D
-1
291 mm