Cleaning & Maintenance; Filter Cleaning - Roca MULTICLEAN A804001 Serie Handbuch

Cleaning & maintenance
Nozzle cleaning
Press oscillating button for 3 sec to activate that nozzle would automatically oscillated back and front during 1 minute. To stop this
function in advance, please press stop button.
Nozzle extension
Press pulsating button for 3 seconds, nozzle reaches out automatically which will be remained for 1 minute.
Warning!
1. Do not use aggressive product to clean. Only use neutral product for cleaning.
2. Do not pull or push the nozzle manually.
3. It is forbidden to take out nozzle by hand directly.

Filter cleaning

1.
Turn tap water shutoff valve off
completely.
4.
Gently brush and clean the filter with
water to remove the clog.
2.
Flush the toilet to empty the water tank
Note: Failure to do so could result in
leaking or flooding.
5.
Reconnect the filter to the T-Valve
properly.
Note: Failure to do so could result in
leaking or flooding.
9
3.
Unscrew the filter from the T-Valve.
(the end not connected to a hose)
6.
Turn the tap water shutoff valve back
on.