Authorised Use; Safety Instructions; Technical Data - EINHELL Bavaria BMR 1300 Bedienungsanleitung

Anleitung_BMR_1300_SPK1:_
Attention!
You must abide by certain safety precautions must be
when using the equipment, in order to prevent injuries
and damage from occurring. Therefore you must
always read through this operating manual carefully.
This manual must be kept in a safe place so that the
information that it contains is always available. This
operating manual must accompany the equipment if it
is transferred to somebody else.
We do not accept any liabilty for accidents or damage
arrising from ignoring this manual and the safety
instructions.

1. Safety instructions

Attention! You must abide by the following basic
safety measures against electrical shocks, injuries
and the danger of fire when using electric tools. Read
and abide by these instructions before you start to use
any tools. These instructions must be kept in a safe
place. You will also find other safety instructions in the
accompanying booklets.
G The equipment must never be used in
surroundings where an explosive atmosphere
exists. Never mix in solvents or substances
containing solvent that have flashpoints below
21°C.
G Do not let the cable touch any parts of your body.
G Only use the extension cable approved for use in
the working area.
G The unit must only be started and stopped when it
is inside a mixing vessel. Ensure that the mixing
vessel is placed on a solid, secure base.
G Never reach into the mixing vessel with your
hands or any other object during the mixing
process.
G We recommend that you always wear industrial
safety gloves and safety googles when working
with the mixer.
G Wearing close-fitting clothes is mandatory.
G Always allow for reaction torque
28.12.2006 11:29 Uhr Seite 7

2. Authorised use

The machine has been designed to mix liquid and
powderery building materials such as paint, mortar,
adhesive, plaster and similar substances. The
relevant mixing action (which depends on the
consistancy of the materials and the quantity that has
to be mixed) must be set up for the appropriate mixing
tool.
Please note that our unit has not been designed for
commercial, industrial or professional use. We will not
accept any guarantee claims if the unit was used in
commercial, industrial or professional sectors or
comparable activities.
3. Description (Ill. 1/2):
1 On/Off switch
2 Locking knob
3 Speed control
4 1st gear / 2nd gear switch
5 Mixer holder
6 Mixer

4. Technical Data

Mains voltage:
Power consumption:
Idle speed: 180-460/300-700 min
Mixer holder:
Acoustic pressure level: L
pA
Acoustic level: L
WA
Vibration a :
hv
Safety insulation class:
Weight:
GB
230V ~ 50 Hz
1,300W
-1
M14
82 dB(A)
93 dB(A)
< 2.5 m/s 2
II /
4.7 kg
7