What To Do If - Electrolux EHG30215 Benutzerinformation

WHAT TO DO IF...

Problem
There is no spark when lighting
the gas
The flame is blow out immedi-
ately after ignition
The gas ring burns unevenly
If there is a fault, first try to find a solution to
the problem yourself. If you cannot find a
solution to the problem yourself, speak your
dealer or the local Service Force Centre.
If you operated the appliance incorrect-
ly, or the installation was not carried
out by a registered engineer, the visit
from the customer service technician or
1
MOD.
PROD.NO.
SER.NO
DATA
MODEL
1 Stick it on Guarantee Card and send
this part
2 Stick it on Guarantee Card and keep
this part
3 Stick it on instruction booklet
Possible cause
• There is no electrical supply
• Burner cap and crown are
placed uneven
• Thermocouple is not heated
sufficient
• Burner crown is blocked with
food residues
2
MOD.
PROD.NO.
SER.NO
03 IT
DATA
MADE IN ITALY
MODEL
• Make sure that the unit is
• Control the fuse. If the fuse is
• Make sure that the burner
• After lightning the flame,
• Make sure that the injector is
dealer may not take place free of
charge, even during the warranty peri-
od.
Labels supplied with the accessories
bag
Stick the adhesive labels as indicated be-
low:
3
MOD.
PROD.NO.
0049
SER.NO.
These data are necessary to help you
quickly and correctly. These data are
available on the supplied rating plate.
• Model description .................
• Product number (PNC) .................
• Serial Number (S.N.) .................
electrolux 21
Remedy
connected and the electrical
supply is switched on.
released more than one time,
refer to a qualified electrician.
cap and crown are in correct
positions.
keep the knob pushed for
approximately 5 seconds.
not blocked and the burner
crown is clear of food parti-
cles.
TYPE
230V-50Hz
IP20