Switching on
the appliance
Switch on the appliance with the On/Off
button 2/1.
A warning signal sounds. Alarm
button 2/2 flashes.
Press the alarm button 2/2. The warning
signal switches off.
The alarm button 2/2 remains lit until
the set freezer compartment temperature
has been reached.
When the door is open, the light in the
refrigerator compartment is lit.
Note
If the light switch, Fig. 1/9, is pressed
when the door is open, the light and the
displays on the controls go out.
The factory has recommended
the following temperatures:
Refrigerator compartment: +4 °C
■
Freezer compartment: –18 °C
■
Operating tips
When the appliance has been
■
switched on, it may take several hours
until the set temperatures have been
reached.
The fully automatic No Frost system
■
ensures that the freezer compartment
remains free of ice. Defrosting is no
longer required.
The sides of the housing are
■
sometimes heated slightly. This
prevents condensation in the area of
the door seal.
If the freezer compartment door
■
cannot be immediately re-opened after
it has been closed, wait until the
resulting low pressure has equalised.
Setting
the temperature
Fig. 2
Refrigerator compartment
The temperature can be set from +2 °C
to +8 °C.
Keep pressing temperature setting
button 7 until the required refrigerator
compartment temperature is set.
The value last selected is saved.
The set temperature is indicated
on temperature display 8.
We recommend a factory setting
of +4 °C in the refrigerator compartment.
Perishable food should not be stored
above +4 °C.
Freezer compartment
The temperature can be set from -16 °C
to -24 °C.
Keep pressing temperature setting
button 4 until the required freezer
compartment temperature is set.
The value last selected is saved.
The set temperature is indicated
on temperature display 5.
We recommend a factory setting of -
18 °C in the freezer compartment.
en
29