Description Of The Crimping Head - Weidmuller APG 80 Bedienungsanleitung

Operation
CAUTION
Use only the batteries foreseen for the purpose in the tools. The use of
other batteries could cause injury and the danger of fire.
In case of incorrect usage liquid could leak from the battery. Avoid contact
with the liquid. In case of contact with the skin wash with abundant water.
Consult a physician if the liquid comes into contact with your eyes. Liquid
that has leaked from the battery may cause irritation to the skin or burns.
3.3

Description of the crimping head

Item Definition
[ 1 ] Crimping head
[ 2 ] Dies holder
[ 3 ] Pawl
[ 4 ] Crimping dies
The crimping head is designed to crimp terminals and connectors with up to 400 mm²
maximum cable cross sections, for cord-end-sleeves up to a cross section of 240 mm²
and for round-forming of sector-conductors. Parts which are under voltage must not be
processed with the crimping tool.
CAUTION
Before starting operation make sure that all active parts in the
working area are disconnected. If this is not possible, take appropriate
protection measures for working in the proximity of active parts.
42
Function
80 kN crimping head to crimp
terminals and connectors with up to
400 mm²
to take the crimping dies
to open and close the crimping head
crimping dies with various profiles
3
4 2 1
1548610000/00/09.14