Technical And Functional Features - Weidmuller APG 80 Bedienungsanleitung

2.3

Technical and Functional Features

• The body of the pump and all components are made of high resistance materials
and tested.
• The casing is entirely made of isolating, shock resistant polyamide, reinforced with
fibreglass.
• The equipment has a light, compact and robust structure.
• The range of the operating temperature is between –10 °C and +50 °C.
• The maximum operating pressure of the pump and power pack is 700 bar (70 MPa)
• The safety valve of the system is adjusted to 700 bar (70 MPa)
• The system is equiped with an advancement due to a special double piston
technology, characterised by a faster low-pressure advancement and a slow
high-pressure advancement. The capacity of the battery-powered press is 0.7 l/min
under low pressure and 0.1 l/min under high pressure.
• The machine has a great reverse capacity for more rapid processes.
• The return way of the working head is controlled by the software.
• The progress of compression can be shown on the PC (pressure and operating
time).
• Control of the equipment is realised through a micro-controller.
• Pressure control is performed by an electronic pressure sensor.
• The charge of the power pack is constantly kept under control.
• Management of technical assistance is performed with an electronic system.
• The traceability of processes is ensured by automatic registration and saving in the
machine memory.
• The data saved can be read and the software can be updated by a mini
USB interface.
• Additional LED indicators provide rapid information on the status of the machine.
• T he first service assistance should be performed after 10,000 cycles, but can be
freely programmed according to the conditions of use.
1548610000/00/09.14
Product description
39