Timer; After Deep-Frying - Silvercrest SKF 2800 B2 Bedienungsanleitung

Timer

After deep-frying

■ 12
Downloaded from www.Manualslib.com
You can programme a countdown of up to 60 minutes with the timer
■ Press the " " button on the timer
■ Press the "+" and "-" buttons to set the desired time in minutes.
■ Press the "
" button to start the time countdown. The set time will flash
twice to show that the countdown is starting.
You will hear a few beeps on completion of the countdown.
The timer will switch off automatically.
TIPS
► The heating element
Therefore, take note of the signal tone from the timer
the food.
► When the battery is depleted, replace it. Always use batteries of the same
type. Ensure that the batteries are inserted with the correct polarity.
1) When the food is ready, pull the handle upwards until the latch handle
engages.
2) Leave the frying basket
3) Press the On/Off switch
the power plug from the mains power socket.
4) When the food has dripped off, open the appliance lid by pressing the latch
handle .
WARNING – RISK OF INJURY!
► Never touch the frying basket
hot! Only lift the frying basket
5) Lift the frying basket
off excess oil or grease over the fryer.
6) Tip the fried food into a bowl or a sieve (lined with absorbent kitchen paper!).
│
GB
manuals search engine
to switch it on.
is NOT switched off when the countdown finishes!
in this position to drip off.
. The deep fat fryer is now switched off. Remove
directly after deep frying. It will be extremely
out of the deep fat fryer using the handle!
carefully out of the deep fat fryer. If necessary, shake
:
to avoid spoiling
SKF 2800 B2