Parameter Description; Lc-Display Mode - Siko MA508SG Originalmontageanleitung

MA508SG
28

Parameter Description

Downloaded from www.Manualslib.com
7 Parameter Description
Below, all parameters and functions of the electronic display are
explained. The column "Menu text PTM" showns the allocated text dis-
play. For this purpose, the operating mode "PCon" is selected in the PTM
(see User information "PTM").

7.1 LC-Display Mode

Description
The user wakes the LC display by pressing the
The LC display is automatically switched off after the
next actuation of the
inactivity.
LCD
ON
LC-Display
The LC display appears with sensor movements* or by
pressing the
switched off after the next actuation of the
after 15 minutes of inactivity.
LCD
ON with movement or
LC-Display
LC display is olways on. The
* The condition sensor movement is met as soon, as the sensor was moved
by at least 2.5 mm and no "ERROR" status exists (see chapter 5.4).
Accordingly, there is inactivity when the sensor has not been moved by
2.5 mm within ~15 min. The LC display will then be switched off.
MA508SG · Date 05.12.2014 · Art. No. 88054 · Mod. status 468/14
manuals search engine
key of after 15 minutes of
OFF
or switch off
LC-Display ON
after 15 min.
key. The LC display is automatically
OFF
key
LC-Display ON or switch off
after 15 min.
key has no effect.
English
Menu text PTM
"Lc.tA"
key.
"Lc.SE"
key or
"Lc.On"