Sun SWB 200 Betriebsanleitung Seite 66

A
66
Downloaded from www.Manualslib.com
5-29
55g.
75g.
B
5-31
manuals search engine
Operation
5.9.2 Hidden weights placement
How to fi t adhesive weights on the left side
of the rim disc
Clean the fi tting position before attaching the
—
adhesive weights.
Fit adhesive weights on the left side of the rim
—
disc as described in Chapter 5.8.
Applying hidden adhesive weights
The measured values and the positioning arrows for
the two correction positions behind the spokes (Figure
5-29) are given on the right of the Indications Field.
Turn the wheel to move one of the split
—
imbalances, on the right side (A,Figure 5-31)
into the compensation position (green arrows),
then lock the wheel with the brake pedal.
Clean the application point before attaching the
—
adhesive weight.
Apply the balance weight at the point indicated
—
(in the example 5 grams, A,Figure 5-31).
Turn the wheel to reach the remaining split right
—
side weights compensation position, then lock
the wheel with the brake pedal.
Having cleaned the area affected, apply behind
—
the second spoke the weight of the value
indicated
(in the example 45 grams, B,Figure 5-31).
Note:
Applying split weights does not involve priorities.
The operator can choose which to apply fi rst.