Sauber RVC-124116.2 Gebrauchsanleitung Seite 18

CLEANING AND MAINTENANCE
Note:

A cleaning brush and a HEPA filter replacement are provided with the packaging.

We don't suggest washing the HEPA filter. If you have it washed, dry it thoroughly before it's been put back,
and replace it with a new HEPA filter after washing 4 to 5 times.
1. Make sure the machine and charging base are unplugged before cleaning.
2. Do not clean the machine and power supply by immersing in water or in other liquids.
3. To clean the dust box and HEPA filter, follow below steps:
A. Lift up the cover of the machine.
B. Take out the dust box by its handle.
C. Take off the HEPA filter. It is recommended to replace it with a new HEPA filter after use of 3 – 6
months. When the HEPA filter is broken, it must be replaced with a new one.
D. Push the opening switch to open the cover of the dust box.
E. Pour out the dust box. Make sure the dust box inlet is not blocked.
F. Wash the dust box with water or a mild detergent. Rinse and dry it completely before placing it back.
G. Put back the HEPA filter to the dust box. Put back the dust box into the machine.
4. After removing the dust box, check the suction hole of the machine and remove any foreign object.
5. Gently wipe the sensor, charge pole pieces and chip pole pieces with a cleaning tool or a soft dry cloth.
Never let water or any other liquid enter into the charging base.
6. Gently wipe the machine surface with a cleaning tool or a soft dry cloth. Never let water or any other
liquid enter into the machine.
7. Clean the side brushes. If there's much hair entangled, use scissors to carefully cut the hair. Replace the
side brushes if they are damaged.
8. Do not use gasoline, alcohol and other strong irritant cleaning lotion to clean the machine.
9. If the machine will not be used for a long time, charge the machine fully and then turn off the machine.
Store the machine in a cool and dry place.
COMMON ERRORS
Failure mode
Left sensor failure
Front sensor failure
Failure reminder
Indicator lights flash twice and the
buzzer has one sound.
Indicator lights flash 3 times and
the buzzer has one sound.
- 17 -
Trouble shooting
Check if the left sensor has too
much dust; clean the dust off.
Check if the front sensor has too
much dust; clean the dust off.