Sauber RVC-124116.2 Gebrauchsanleitung Seite 17

meter on its left and right. (see below drawing).
Note: if you want to fix the charging base, you can use the provided double-sided sticker (B) to adhere the back
of the charging base to the wall.
2. Connect the adaptor first to the charging port on the charging base, and then to the power outlet. The
indicator light on the charging base will illuminate when the power is connected.
3. When the battery is low, the machine will have buzzer sound 3 times and automatically start searching for
the charge base. The indicator light on the recharge button will turn on; the indicator light on the on/off
button will turn off. When you press the recharge button (in standby mode), the machine will also start
searching for the charging stand.
Note: You can also manually place the machine onto the charging base for charging. Make the two chip pole
pieces touch the two charging pole pieces.

Charging directly by the adaptor
Connect the adaptor to the charging port of the machine, and then connect it to the power outlet.
NOTES:

When the machine is in charging, the indicator light on the on/off button will flash. When charging is
finished, the indicator light on the on/off button will illuminate still. (If the charging goes by the charging
base, the indicator light on the charging base will also flash when charging and illuminate still when
charging is finished.)

Charge the machine for 12 hours when first time of charging.

For daily using, it's recommended to store the machine on the charging base and ensure that the charging
base is powered on.
- 16 -