Using The Flash - Medion MD 87021 LIFE X44000 Bedienungsanleitung

Using the stabiliser
The image stabiliser compensates slight camera movements, such as shaking, and prevents the
picture from becoming blurred.
 From the camera menu, select "STABILIZER" and activate or deactivate the function here.
PLEASE NOTE!
When using a tripod, or if there is sufficient light, you will probably not need to use
the image stabiliser.

Using the flash

If there is insufficient light for the photo, the on-board flash can provide the additional light re-
quired.
Press the flash button
Symbol
AUTO: The flash is activated automatically when the shooting conditions re-
quire additional lighting.
Flash is triggered before the actual flash; used to prevent "red-eye" effect. The
camera detects the brightness and only flashes if necessary.
Flash always on
"Slow Sync": The flash is synchronised with slow shutter speed.
Flash always off
The flash only works in single shot and self-timer mode. It cannot be used for photo sequences
or video recordings.
Using the flash increases battery usage. If the battery is almost flat, the flash takes longer to
charge.
WARNING!
Do not use the flash to take close-ups of people and animals. Maintain a distance of at
least one metre from your subject.
34
repeatedly to select the following flash settings:
Description