Mounting Batteries; Mounting; Battery Type; Operation Smartcore Batteries - Lupine PIKO Bedienungsanleitung

Mounting Batteries

Battery mounting:
Your battery is supplied
with a velcro strap, coated
with an anti-slip material
to ensure a secure mount.
Use the strap which most
closely matches your tube
size.

Battery type:

The hardcase battery is mounted
with a velcro as shown here. So
called Smartcore batteries also
come with a capacity indictator as
explained on the next page.
FastClick batteries dont have a loop for a
velcro.
However they can be directly put into the
clicksystem of the FastClick headbelt or 3M
clicksystem.
24 Piko
Downloaded from www.Manualslib.com
13.8Ah 6.9Ah 3.5Ah 3.5Ah
manuals search engine
Operation SmartCore battery
Capacity Indicator
Audible:
To check the capacity, simply press the
touch-pad once. At first an audible signal
will sound, which is especially useful
while using the battery mounted on a
helmet or headband, to give a quick
reading in 20% steps.
Visible:
The visible indicator uses 5 red LEDs. The LEDs can operate in two
different operating states: blinking and continuous. LED meanings:
A blinking LED is indicating a 10% step and a continuously glowing
LED a 20% step.
Example: 3 LEDs steady glow (20 %, 40 %, 60 %)
1 LED blinking (80 %)
= 70 % remaining capacity
Taillight
To run the taillight simply press the touch pad two times
operate continuously. To switch off the taillight, simply press the pad again.
Moving light:
Press the touch pad three times to activate the moving light. To switch it off
press the button another time.
5 x = 100 %
4 x = 80%
3 x = 60%
2 x = 40%
1 x = 20%
and the 5 LEDs will
Piko 25