Mounting Batteries; Battery Mounting - Lupine Piko R Bedienungsanleitung

Mounting Batteries

Battery mounting:

Your battery is supplied with a velcro
strap, coated with an anti-slip material
to ensure a secure mount. Use the
strap which most closely matches your
tube size.
Battery type:
The hardcase battery is mounted
with a velcro as shown here. So called
Smartcore batteries also come with a
capacity indictator as explained on the
next page.
FastClick batteries dont have a loop for a
velcro. However they can be directly put
into the clicksystem of the FastClick head-
belt or 3M clicksystem.
3 2
13.8Ah 6.9Ah 3.5Ah 3.5Ah
3.5Ah 3.5Ah 2.0Ah 2.0Ah
Operation SmartCore battery
Capacity Indicator
Audible:
To check the capacity, simply press the
touch-pad once. At first an audible signal
will sound, which is especially useful
while using the battery mounted on a
helmet or headband, to give a quick
reading in 20% steps.
Visible:
The visible indicator uses 5 red LEDs. The LEDs can operate in two
different operating states: blinking and continuous. LED meanings:
A blinking LED is indicating a 10% step and a continuously glowing
LED a 20% step.
Example: 3 LEDs steady glow (20 %, 40 %, 60 %)
1 LED blinking (80 %) = 70 % remaining capacity
Taillight
To run the taillight simply press the touch pad two times and the 5 LEDs will
operate continuously. To switch off the taillight, simply press the pad again.
Moving light:
Press the touch pad three times to activate the moving light. To switch it off
press the button another time.
5 x = 100 %
4 x = 80%
3 x = 60%
2 x = 40%
1 x = 20%
33