Lupine PIKO Bedienungsanleitung Seite 12

Helmet Mount
No tools are required for mounting this lamp. The helmet mount is already mounted to the lighthead.
You can attach this helmet light to almost any kind of helmet with ventilation openings.
With the provided battery mount 2.0 and the
broad velcro the battery can be mounted direct-
ly on the helmet.
22 Piko
Downloaded from www.Manualslib.com
First attach the thin velcro with the Lupine logo
to one side of the helmetmount.
Then pull the other end of the velcro through the
ventilation openings available on your helmet and fix
it on the other side of the helmetmount. Tighten the
velcro to avoid slipping of the lamphead during use.
Insert the lamphead into the FrontClick mount.
(Video support YouTube channel "LupineLights")
manuals search engine
Insert the lamphead into the FrontClick
mount of the headband.
(Video on our YouTube channel "Lupine-
Lights")
With the provided extension, the battery
may be carried in your backpack, a pocket
etc.
The FastClick backpart of Piko X 4 can be
replaced by a cable guide backpart.
Headband Mount
The FastClick battery have to be attached
to the FastClick mount on the headband
with the cable looking downwards.
Matching Batteries:
Art.No. 884 2.0 Ah
Art.No. 881 2.0 Ah Smartcore
Art.No. 835 3.5 Ah
Art.No. 842 3.5 Ah Smartcore
Piko Piko 23 2 3