Programming; Dim Levels & Runtimes - Lupine PIKO Bedienungsanleitung

Programming

Light Levels:
By default, the Piko operates in the 3-step mode, several other light programs are available.
They are very easy to select by simply keeping the button pressed until the button's red LED (blue LED)
flashes once, twice, etc. When taking your finger off the button accordingly, the setting will be saved.
Available Press the button
Adjustments until it lights
2 - Step 1x red
3 - Step 2x red
4 - Step 3x red
3 - Step (RVLR) 4x red
3 - Step (ECO) 5x red
start in lowest beam 1x blue
start with highest beam 2x blue
early "battery low warning" 3x blue
late "battery low warning" 4x blue
Alpine SOS 5x blue
SOS 6x blue
Example:
To get into
then release the button.
20 Piko
Downloaded from www.Manualslib.com
Default setting
(after 3 sec)
(after 4 sec)
(after 5 sec)
(after 6 sec)
(after 7 sec)
(after 8 sec)
(after 9 sec)
(after 10 sec)
(after 11 sec)
(after 12 sec)
(after 13 sec)
4-step mode, hold the button until the red LED flashed 3 times,
manuals search engine
Output
Piko 4/X 4
20 W 1800 lm
2-Step
1.5 W 170 lm
20 W 1800 lm
3-Step 6 W 650 lm
0.3 W 40 lm
20 W 1800 lm
9 W 950 lm
4-Step
3 W 350 lm
0.3 W 40 lm
20 W 1800 lm
3-Step
6 W 650 lm
with RVLR
RVLR
3-Step 9 W 950 lm
Eco 3 W 350 lm
0.3 W 40 lm
Runtime varies according to battery age, and condition, as well as ambient temperature.
* Runtime for both batteries together
RVLR:
This mode includes an additional slow flash mode.
SOS /ALPINE SOS: If one of these modes is activated the switch will glow pink and the light will
continue with SOS until the battery is empty.
Note: The SOS sign is an emergency signal!
Misuse may be prosecuted!
Dim Levels and Runtimes
Runtime Runtime Runtime
Piko 7/X 7 Piko X Duo*
2:30 h 1:50 h
1:15 h
15 h 32 h
1:15 h 2:30 h 1:50 h
4 h 8 h
126 h
80 h 160 h
1:15 h 2:30 h 1:50 h
2:30 h 5 h
8 h 16 h
80 h 160 h 126 h
1:15 h 2:30 h 1:50 h
4 h 8 h
RVLR RVLR RVLR
2:30 h 5 h
8 h 16 h
80 h 160 h 126 h
25 h
6 h
4 h
12 h
6 h
4 h
12 h
Piko 21