Einstellpunkte Für 3-Wege-Übergang; Einstellungen Der Digitalen Zeitanpassung - Kenwood KDC-BT950DAB Bedienungsanleitung

Audioeinstellungen
[SUBWOOFER LPF] [SW LPF FRQ]
[SW LPF SLOPE]
[SW LPF PHASE] [REVERSE]
[SW LPF GAIN]
• Für /
[SUBWOOFER] [SPEAKER SIZE]
von und
[SWITCH PREOUT]
wählbar, wenn auf
auf [ON] gestellt ist. (Seite 25)
Einstellpunkte für 3-Wege-Übergang
[SPEAKER SIZE]
[TWEETER] [SMALL] / [MIDDLE]
[MID RANGE] [8CM] [10CM] [12CM]
/ /
[5×7] / [6×8] / [6×9]
[WOOFER] [16CM] [20CM]
/ /
angeschlossen)
[X ' OVER]
[TWEETER] [HPF FRQ]
[SLOPE]
[PHASE]
[GAIN]
[30HZ] [40HZ] [50HZ] [60HZ] [70HZ]
/ / / /
[90HZ] / [100HZ] / [120HZ] / [150HZ] / [180HZ]
[220HZ] / [250HZ] / [THROUGH]
[–6DB] [–12DB] [–18DB] [–24DB]
/ / /
[NORMAL]
(180°)/ (0°)
[–8] [0]
bis
/ :
[SUBWOOFER LPF] [X'OVER]
von
[SUB-W] [SUBWOOFER SET]
(Seite 7) und
/ [LARGE]
[13CM] [16CM] [17CM] [18CM]
/ / / /
[25CM] [30CM] [38CM OVER] [NONE]
/ / / (nicht
[1KHZ] [1.6KHZ] [2.5KHZ] [4KHZ] [5KHZ]
/ / / /
[6.3KHZ] [8KHZ] [10KHZ] [12.5KHZ]
/ / /
[–6DB] [–12DB]
/
[REVERSE] (180°)/ [NORMAL] (0°)
[–8] bis [0]
[80HZ] [MID RANGE] [HPF FRQ]
/ /
/
[HPF SLOPE]
[LPF FRQ]
[LPF SLOPE]
[PHASE]
ist nur
[GAIN]
[WOOFER] [LPF FRQ]
[SLOPE]
[PHASE]
[4×6]
/ /
[GAIN]
• [WOOFER] von [SPEAKER SIZE]
[SUBWOOFER SET]

Einstellungen der digitalen Zeitanpassung

/
Die digitale Zeitanpassung stellt die Verzögerungszeit des Lautsprecherausgangs
ein, um eine geeignetere Umgebung für Ihr Fahrzeug zu erzeugen.
• Weitere Informationen siehe "Automatische Bestimmung der Verzögerungszeit"
auf Seite 28.
[30HZ] [40HZ] [50HZ]
/ / /
[100HZ] / [120HZ] / [150HZ]
[THROUGH]
[–6DB] [–12DB]
/
[1KHZ] [1.6KHZ] [2.5KHZ]
/ /
[8KHZ] [10KHZ] [12.5KHZ]
/ /
[–6DB] [–12DB]
/
[REVERSE] [NORMAL]
(180°)/
[–8] [0]
bis
[30HZ] [40HZ] [50HZ]
/ / /
[100HZ] [120HZ] [150HZ]
/ /
[THROUGH]
[–6DB] [–12DB]
/
[REVERSE] [NORMAL]
(180°)/
[–8] bis [0]
und [WOOFER] von [X'OVER]
auf [ON] gestellt ist. (Seite 25)
[60HZ] [70HZ] [80HZ] [90HZ]
/ / / /
/ [180HZ] / [220HZ] / [250HZ] /
[4KHZ] [5KHZ] [6.3KHZ]
/ / / /
[THROUGH]
/
(0°)
[60HZ] [70HZ] [80HZ] [90HZ]
/ / / /
[180HZ] [220HZ] [250HZ]
/ / / /
(0°)
ist nur wählbar, wenn
27
DEUTSCH