2. Important Safety Information
Use this Respirator strictly in accordance with all instructions in this user manual. Never modify or alter this product.
Do not remove the Respirator until you have left the contaminated area.
•
Only suitable for use by clean-shaven personnel. Facial hair under the seal reduces protection.
•
This Respirator DOES NOT PROTECT YOUR EYES. In conditions that may damage or irritate eyes, use
•
protective eyewear.
Only use your Respirator with the parts and accessories listed in the Data Sheet Section of this user
•
manual.
Do not use the Respirator unless it is powered and running normally.
•
Do not use CleanSpace2
•
Do not use in airborne contaminant concentrations above those specified in your National regulations
•
Do not use for Respiratory protection against unknown atmospheric contaminants or when
•
concentrations of contaminants are unknown or immediately dangerous to life or health (IDLH).
Do not use in oxygen deficient or oxygen enriched atmospheres. Do not use in flammable or explosive
•
environments.
Only for use by trained personnel.
•
Filters need to be regularly changed. The frequency of change depends on use and the concentration of
•
contaminants in the atmosphere.
Do not use for escape purposes. National regulations may impose specific limitations on the use of filters
•
depending on the filter class and the facemask used.
At very high work rates the pressure in the mask may become negative at peak inhalation. This is true of most
Powered Air Purifying Respirators (PAPR). In this case either adjust the equipment or consider an alternative form of
respiratory protection.
LEAVE THE CONTAMINATED AREA IMMEDIATELY IF:
Respiratory warning lights and sounds activate for low battery or blocked filter
•
Any part of the Respirator is damaged
•
Air flow into the mask decreases or stops
•
Breathing becomes difficult or increased resistance occurs
•
You feel dizzy or your airway is irritated
•
You can taste or smell contaminants
•
Your CleanSpace2™ Respirator is suitable for use in the following atmospheric conditions:
Temperature: -10°C to 45°C
•
Relative humidity: 10% to 95% non-condensing
•
The CleanSpace2
If the Respirator has been used in an area that has caused it to become contaminated with a substance requiring
special decontamination procedures it should be placed in a suitable container and sealed until it can be
decontaminated.
Do not disassemble the CleanSpace2
Failure to follow all instructions on the use of this product, and/or failure to use the CleanSpace2
times of exposure, may lead to adverse effects on the wearer's health and may render the warranty void.
Downloaded from
www.Manualslib.com
™
Respirator while it is being charged via the AC adaptor.
™
Respirator will stop functioning if its internal temperature rises above 60°C.
™
Respirator case. There are no user serviceable parts inside.
manuals search engine
3 3
English
™
Respirator during