Beurer BR 60 Gebrauchsanweisung Seite 35

Problem
Application cannot be
started, even though
the ON/OFF switch (2)
is set to ON.
The device does not
switch on, even though
the batteries have been
replaced and the ON/
OFF switch (2) has
been set to ON.
Device outputs
5 acoustic signals and
the illuminated ring (4)
flashes.
Possible cause
The device has
switched off
automatically, as
the activation button
(5) was accidentally
pressed for longer
than 2 seconds.
The device may be
faulty.
This indicates a
potential malfunction.
35
Solution
First switch the device
to OFF using the ON/
OFF switch (2) and then
switch it on again as
usual.
Please contact
Customer Services.
Switch the device
off and repeat the
application again after
10 minutes.
Please contact
Customer Services if
the fault occurs again.