Care And Maintenance; Casing; Probe Head; Bam-Standard - ColorLite sph860 Bedienungsanleitung

Service and maintenance
9

Care and maintenance

9.1

Casing

Special maintenance of the casing is not necessary. To
clean use only a damp cloth. Avoid the use of cleansers,
abrasives or solvents.
9.2

Probe head

Special maintenance of the probe head is also not neces-
sary. To clean use only a fine-haired brush to remove dust
and impurities from the sensor opening. To clean the
housing, use only a damp cloth. Avoid the use of
cleansers, abrasives or solvents.
9.3

BAM-Standard

To provide a reliable and stable calibration, the
BAM-Standard is fitted into a cap precisely matching the
diameter of the probe head. To protect the BAM-Standard
from dirt, always close the cap immediately after use.
Touching or attempting to clean the surface of the
BAM-Standard, can make it unusable and result in
invalid readings!
ColorLite GmbH | sph860/sph900
Downloaded from www.Manualslib.com manuals search engine
9.4

Service

The ColorLite GmbH offers a comprehensive service and
maintenance support for the sph860/sph900 and its ac-
cessories. A regular service by the ColorLite GmbH, de-
pending on application intensity is recommended every 1 -
2 years.
'
+49 (0) 5552 999 580
š info@colorlite.de
Service and maintenance
69