Number Of Scans; Colour Systems - ColorLite sph860 Bedienungsanleitung

Settings / Number of scans
6.6

Number of scans

For measuring inhomogeneous samples such as granules
or structured surfaces such leather, it is possible to in-
crease the number of scans from which the colour values
are calculated.
6.7

Colour systems

The ColorLite sph860/sph900 offers the possibility to dis-
play the measured colour data in different colour systems
or values. In the menu "Settings" - "Colour systems" a
list of available systems are listed. Up to 8 colour systems
can be selected at one time for the sample values. In the
same way up to 6 systems can be selected to display the
standard results and 1 for the memory viewer.
66
Downloaded from www.Manualslib.com
Following scan values are available;
1 (off), 3, 5, 10, 15, 20. When se-
lected an average is automatically
calculated. Between each scan the
standard deviation is displayed.
"Number of scans" is located in
the "Settings" menu. The current-
ly set value is displayed. The de-
fault setting is "1". Set the value
using the navigation keys.
manuals search engine
Following possibilities are for choice:
Absolute values CIE L*, a*, b* and Lab
Lab ∆E
∆E.
"Y" tristimulus value and chromaticity
Y x z
values x and y.
HLab Absolute values Hunter Lab and ∆E
Luv ∆E Absolute values CIE L*, u*, v* and ∆E.
X Y Z Tristimulus values X, Y and Z.
∆L ∆a ∆b CIE Lab ∆- values are displayed.
Pass/Fail See in chapter
Graph Relative CIE Lab diagram (only
∆L ∆a ∆b sph900)
High resolution graph 400 to 700 nm
Remission
(only sph900)
CIE ΔE94, ΔECMC (1:1 or 1:2 opt.)
CMC+CIE94
(only sph900)
Displays yellowness and whiteness
Whte/Yellow
index (optional feature of sph860)
Settings / Color systems
6.5 Pass/Fail
ColorLite GmbH | sph860/sph900