Probe Head; Calibration Cap; Connections - ColorLite sph860 Bedienungsanleitung

Measuring principle
3.2

Probe head

The probe head [see Fig. Probe head]
connected to the operating unit via a flexible stainless
steel cable.
This cable contains an optical fibre and should not
be forcefully bent (less than 15 cm radius) during
the measurements.
3.3

Calibration cap

To calibrate the sph860/sph900 a certified white standard
is supplied. This standard is traceable to the normal of the
PTB (Physikalisch-Technische Bundesanstalt) in Braun-
schweig and comes with a certificate from the BAM (Fed-
eral Institute for Materials Research and Testing).
46
Downloaded from www.Manualslib.com
is permanently
Fig. – Probe head
manuals search engine
To enable a reliable and consistent
calibration the BAM standard is
precisely fitted dust proof housing -
the calibration cap.
So that the BAM standard is
protected from soiling, always
replace the lid after calibration.
3.4

Connections

Device overview
Fig. – Calibration cap
Fig. - Connections
ColorLite GmbH | sph860/sph900