Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Assembly
Lock the ON/OFF switch of the concrete grinder.
1
Repairs may be executed only by appropriately qualified and experienced
personnel.
electric specialist.
Due to its design, the machine needs a minimum of care and maintenance.
However, the following points always have to be observed:
Downloaded from
www.Manualslib.com
2
2
3
Care and Maintenance
Before the beginning of maintenance or repair works you
have to disconnect the plug from the mains.
After every repair the machine has to be inspected by an
Always keep the power tool and the ventilation slots clean.
manuals search engine
Put the top frame with the weights
on the frame handle of the machine.
Then put the device with the holder
under the frame handle and fix it with disc,
spring ring and wing nut
frame
.
2
Wind the line cord of the tool on the
holder meant for this purpose. Make
sure that the switch of the floor
guiding device is not pressed or
locked. Plug the grinder in the socket of
the floor guiding device. Lead the hose
of the vacuum cleaner above the floor
guiding device, connect it with the
grinder. The clamp will avoid a slipping
of the hose.
20
2
1
on the top
3
Werbung
