nVent RAYCHEM TCON-CSD/20 Betriebsanleitung Seite 14

Alarms
Parameter
Al.L
Al.H
A.Hy
Al.d
S.Er
Downloaded from www.Manualslib.com
Meaning
Low alarm limit
As soon as the process value falls below this limit, the alarm message
Al.Lis displayed, see Chapter 7 "Alarm messages".
High alarm limit
As soon as the process value goes above this limit, the alarm message
Al.His displayed, see Chapter 7 "Alarm messages".
Alarm hysteresis
The hysteresis that was set is below Al.Hor above Al.L.
Alarm suppression time
An alarm from Al.Lor Al.His not displayed for this time. If an alarm is
present for longer than Al.d, then it will be displayed.
Response to over/underrange
0: relay de-energized
1: relay energized
manuals search engine
Value range
from...factory-set...to
-999 ... –200 ... +999
-999 ... 500... +999
-999 ... 1�0 ... +99.9
0 ... 60 min
0, 1
nVent.com | 14