Accu-Chek LinkAssist Gebrauchsanweisung Seite 10

8
j
Press the adhesive pad onto the skin.
9
j
Hold the adhesive pad in place.
j
Press the side wings of the handling aid
together.
j
Remove the handling aid in the direction of
the arrow.
10
j
Hold the cannula casing in place.
j
Remove the introducer needle straight
upwards.
j
Dispose of the introducer needle in such a
way that it will not cause injury to anyone.
Place the introducer needle back into the
needle cover or into a cannula disposal
container.
8
11
j
Screw the luer-lock connector into the
insulin pump adapter.
Do not use any tools to screw the luer-
W
lock connector into the insulin pump
adapter. This could damage the luer-lock
connector.
12
j
Fill the transfer set as described in the User's
Manual of the insulin pump until insulin drips
from the needle inside the connector. There
must not be any air bubbles in the cartridge
or transfer set.
You must fill up the transfer set completely
W
before you connect it to the cannula. The
transfer set must not contain any air
bubbles.
j
Hold the cannula casing in place.
j
Push the connector onto the cannula casing.
You must hear and feel the connector click
into place.
If you do not hear and feel the connector
W
click into place, replace the head set and
the transfer set.