Connecting The Power Cord; Mounting The Temporary Stands - Sharp PN-465E Bedienungsanleitung

Caution
• Do not use a power cord other than the one supplied with
the monitor.
1. Turn off the main power switch.
2. Plug the power cord (supplied) into the AC input terminal.
3. Plug the power cord (supplied) into the AC power outlet.
Main power switch
1
AC input terminal

Mounting the Temporary Stands

Caution
• The monitor is heavy. It must be handled by 2 or more
people.
• Please note that the temporary stands are for temporary
use only until the monitor is properly mounted.
The temporary stand can be mounted at a position shown in
the illustration.
12
E

Connecting the Power Cord

3
For power
outlet
2
Power cord (Supplied)
Remove the screws from the monitor and mount the
temporary stand using the screws.
Temporary stand
Caution
• After detaching the temporary stand, be sure to re-mount
the removed screws on the monitor.
Screws