Klarstein Vanquish Bedienungsanleitung Seite 29

Lighting Instructions (Side burner)
1. Open the lid of the side burner.
2. Push down the side burner control knob and keep pressing whilst turning anti-
clockwise to the "HIGH" position (a clicking sound is heard), this will light the side
burner. Observe if the burner has lit. If not repeat this process.
3. If the burner has not lit after retrying wait 5 minutes and repeat step 2.
4. Adjust the heat by turning the knob to the High/Low position.
5. If the burner does not light. Light the appliance with a match using a long match or
taper. Consult your gas dealer to rectify the ignition.
6. To turn the side burner 'OFF' , turn the control knob clockwise to the 'OFF' position.
If you wish to turn the complete barbecue 'OFF' turn the cylinder valve or regulator
switch to the 'OFF' position and then turn the control knob on the appliance
clockwise to the 'OFF' position.
Before cooking for the first time, operate the barbecue for about 15 minutes with the
lid closed and the gas turned on LOW. This will "heat clean" the internal parts and
dissipate odour from the painted finish.
Clean your barbecue after each USE. DO NOT use abrasive or flammable cleaners, as
it will damage the parts of the product and may start a fire. Clean in warm soapy water.
WARNING: Accessible parts may be very hot. Keep young children away from the
hot appliance at all times (even while cooling down!). It is recommended that protective
gloves (eg oven gloves) be used when handling particularly hot components.
WarnIng
Danger of deflagration
If the burner still does not light ,turn the gas control knob to " OFF"
and wait for 2 minutes for the unburnt gas to evaporate before
lighting again.
EN
29