Honeywell ESSER essernet SEI1 Bedienungs- Und Installationsanleitung Seite 70

®
Serial essernet
Zone range
This menu is used to enter the zone range of the FACPs which are connected via the essenet
These intervals are identical to the zone intervals in all other FACPs connected to the essernet
Fig. 26: Zone range
The zone and control zone numbers must be unique and must not be used twice in
the essernet
70
interface (SEI1)

and the sub nets.
Selection of the FACP number.
This number must be identical with the
address set at the essernet
the panel (max. range 1 to 31).
Zone range 0 to 9999

.

.

micro modules of
FB 798819 / 05.18