Honeywell ESSER essernet SEI1 Bedienungs- Und Installationsanleitung Seite 67

General Configuration
In this menu the device type is adjusted and the protocol setting for the interface connection is
defined.
Protocol configuration
Configuration of the interface for the required SEI1-type (refer to next page).
Fig. 22: General Configuration
FB 798819 / 05.18
®
Serial essernet
Selection of unit type
Selection of the required interface.
SIO1 = integrated RS485
SIO2 = RS232 or TTY interface
(depending on the interface
module used)
interface (SEI1)
67