System Requirements For The Facp; Sei1 Variants - Honeywell ESSER essernet SEI1 Bedienungs- Und Installationsanleitung

7.3

System requirements for the FACP

When connecting a serial essernet
FACP software versions are required:
Fire alarm control panel (FACP)
800x
IQ8Control
FlexES Control
7.4

SEI1 Variants

The following variants of the serial essernet
SEI1 variants
*1
EDP unidirectional
*1
EDP bidirectional
FACP 8000 / IQ8Control Remote
*1
EDP - Esser Data Protocol
The programming software SEI1 Setup version V1.06R002 and higher is required
if the standard configuration is to be changed. Further informations see Chapter 12.
FB 798819 / 05.18
Serial essernet
®
interface to an ESSER fire alarm control panel, the following

interface are available:
®
interface (SEI1)
System software
from version
V2.41
V3.00
V04.01
Part No.
784855
784856
784859
41