Philips HD4417 Bedienungsanleitung Seite 9

- Turn the food from time to time to ensure that it remains juicy inside and does not dry out.
Do not use any metal tools like forks or grill tongs as they damage the non-stick coating of the
grilling plate.
- Do not turn the grilled food too frequently. When the items are brown on both sides, grill them
at a lower temperature to ensure they do not dry out and are cooked more evenly.
- If you want to defrost frozen food, wrap the frozen food in aluminium foil and set the
temperature control to position 1 or 2. Turn the food from time to time. The defrosting time
depends on the weight of the food.
- When you prepare satay, chicken, pork or veal, first sear the meat at a high temperature
(position 5). If necessary, you can then set the temperature control one position lower and grill
the food until it is done.
- When you make satay or kebab, soak bamboo or wooden skewers in water to prevent them
from getting scorched during grilling. Do not use metal skewers.
- Sausages tend to burst when they are being grilled. To prevent this, punch a few holes in them
with a fork.
- Fresh meat gives better grilling results than frozen or defrosted meat. Do not put salt on the
meat until after you have grilled it. This helps to keep the meat juicy. For the best result, make
sure the pieces of meat you prepare are not too thick (approx. 1.5cm).
This table grill is not suitable for grilling breadcrumbed food.
cleaning
Never use abrasive cleaning agents and materials, as this damages the non-stick coating of the plate.
1 Set the temperature control to the 'OFF' position.
2 Unplug the appliance and let it cool down.
3 Pull the thermostat unit out of the appliance (Fig. 6).
4 Wipe the thermostat unit with a damp cloth.
Do not immerse the thermostat unit with mains cord in water or any other liquid.
5 Remove excess oil from the grilling plate with a piece of kitchen paper before you remove
the grilling plate for cleaning.
6 Lift the grilling plate from the base by its handgrips (Fig. 7).
Note: If the thermostat unit is still inserted into the appliance, you cannot remove the grilling plate.
7 Soak the grilling plate in hot water with some washing-up liquid for five minutes or drizzle
some lemon juice onto the grilling plate. This loosens any caked food or grease.
8 Slide the drip tray out of the base (Fig. 8).
Note: The drip tray can only be slid out of the base in one way.
9 Clean the base and the drip tray with a damp cloth.
10 Clean the grilling plate with a soft cloth or sponge in hot water with some washing-up liquid
or in the dishwasher.
11 Dry the grilling plate and drip tray.
The inside of the thermostat unit socket must be completely dry before you reinsert the
thermostat unit into it. To dry the socket, wipe the inside with a dry cloth. If necessary, shake out
excess water first.
12 Reassemble the appliance.
4222_200_0163_5_DFU booklet simple_A5_v1.indd 9
EnglisH
9
7/25/13 3:59 PM