On/Off; Operating Mode; Humidity; Temperature - Fagor Visual Plus VPE-061 Bedienungsanleitung

VISUAL PLUS INSTRUCTIONS MANUAL
ENGLISH

ON/OFF

The oven is switched on/off with the main
ON/OFF switch. Each time that the oven is
switched on, the last-used values are displayed.
If this is the first time the oven is switched on,
the defect values are displayed.

OPERATING MODE

Oven operating mode selection. The selected
mode is highlighted.
CONVECTION
REGENERATION
When the oven is switched on, it adopts the last
used parameters. If the function is changed, the
values of the function being used are stored and
are reloaded if you return to this function.

HUMIDITY

This section shows the humidity level selected
for the oven. Blue represents moist air, red dry
air, while when it is off or black (only in
Convection mode), the required humidity level is
displayed. These are the default ranges and
values of each operating mode:
•
Convection: Range [0.0.100].
•
Mixed: Range [0.0.100].
•
Regeneration: Range [80].
•
Steam: Range [100].
To modify the humidity level, press
The increase /decrease is in steps of 10%.
The buttons are only enabled in the Convection
or Mixed mode, as the humidity value is fixed in
the other two operating modes.

TEMPERATURE

This
temperature and that selected by the user.
The temperature shown on the left side of the
screen is the true temperature in the chamber.
The temperature shown on the right side of the
screen shows the temperature selected by the
user.
MIXED
STEAM
The range of temperatures for each operating
mode is shown below:
Temperature selection: press the central button
Select the required value and confirm or cancel
with ok / cancel.
The temperature up
allow the temperature setting in the chamber to
be modified in units within the established range.
If either of the buttons is pressed for more than 2
seconds, the increase / decrease is in steps of
10.
When the oven is in delta mode these buttons
are not displayed.
and .
55
section shows the
•
Convection: Range [20..300].
•
Mixed: Range [20.0.250].
•
Regeneration: Range [20.0.180].
•
Steam: Range [20.0.99].
which enables the selection using numbers.
/down
true chamber
buttons