Technical Features - Riello Burners FS10 Typ 564T30 Montage Und Bedienungs Anleitung

Forced draught gas burner

TECHNICAL FEATURES

Thermal output
Net heat value
Gas
(Family 2)
Pressure
Electrical supply
Motor
Capacitor
Ignition transformer
Absorbed electrical power
For gas family 3 (LPG) ask for separate kit.
COUNTRY
GAS CATEGORY II2Er3P
CE marking according to Gas Appliance Directive 90/396/EEC; PIN 0063AP6680.
According to directives: EMC 89/336/EEC, Low Voltage 73/23/EEC, Machines 98/37/EEC and
Efficiency 92/42/EEC.
Gas train according to EN 676.
1 – Air-damper
2 – Screws for fixing the air-damper
3 – 7 pole socket for electrical supply
and control
4 – 6 pole socket for gas train
5 – Grommet
6 – Screw for fixing the cover
7 – Lock-out lamp and reset button
NOTES
– The grommet (5) supplied with the burner, must be fitted to the same side of the gas train.
– After having installed the burner verify the access to the fixing screws of the cover.
If necessary replace them with the fixing screws (6) fig. 1 supplied as equipment.
2445
FS10
52 – 116 kW
8 – 12 kWh/m
min. 10 mbar
single phase, 230 V ± 10%
230 V / 0.7 A
4 µ F
primary 230 V / 1.8 A – secondary 8 kV / 30 mA
0.13 kW
FR GB - IE IT - AT - GR - DK - SE
II2H3P
3756432
CODE
– 45,000 – 100,000 kcal/h
3
– 7,000 – 10,340 kcal/m
– max. 40 mbar
II2H3B/P
7
6 5
1
GB
564T30
TYPE
3
~
50Hz
NL DE
II2L3B/P II2ELL3B/P
Fig. 1
4 3
D5163
LU
II2E3B/P
1
2
2