Cleaning And Maintenance - Concept TE2030 Bedienungsanleitung

expires. For easier removal you can raise the toast up several millimetres
using the bread lowering lever (7)
8. If you want to stop toasting before the selected time elapses, press the STOP
button (5).
9. Unplug the unit from the mains after you finish toasting.
WARNING!
The bread may ignite if the unit is not set or used properly. Never leave the unit
unattended while in use, to be able to turn if off immediately, if needed.
The unit reaches high temperatures during operation and remains hot for
some time after being turned off. Do ot touch hot surfaces. Use the handle
and buttons.
Crisping bread
The unit is equipped with a bread crisping extension (2) used to crisp white
bread, croissants etc.
1. Do not insert any bread in the toasting slots (3).
2. Shift out the bread crisping extension (2) using the lever (1).
3. Place unpacked unfrozen bread on the crisping extension (2) (Fig. 2).
4. Set the required toasting time using the selector (8). The toasting time should
be set according to the user's personal taste and the type and freshness of
the bread used. If you are using the unit for the first time, we recommend
selecting position 3 or 4.
5. Press the lever (7) downwards until it clicks and remains in this position.
The unit will switch on and hot air will come out of the toasting slots. The
operation indicator located in the stop button goes on (5).
Note: If the unit is not connected to the mains, the lever will not remain in the
lowered position.
6. After the selected time elapses the lever (7) will move upwards and the unit
will switch off.
7. If you want to stop crisping before the selected time elapses, press the STOP
button (5).
8. Unplug the unit from the mains after you finish crisping.
9. When the unit cools down, move the bread crisping extension release lever
to its initial position to collapse the extension (2).

CLEANING AND MAINTENANCE

WARNING!
Before cleaning the unit, always disconnect the power cord from the wall outlet!
Prior to handling, make sure the unit has cooled down!
The surface of the unit may only be cleaned using a wet cloth. Do not use any detergents or hard objects, as they may
damage the unit's surface!
Remove the crumb tray, empty it, and install it back into the unit before the next toasting operation. Do not let crumbs
accumulate in the lower section of the unit.
If crumbs remain inside the toaster, turn it upside down and remove crumbs by slight knocking.
Never clean the unit under running water, do not rinse it, and do not submerge it in water!
24
EN
Fig. 2
TE2030