Vitek Andromeda VT-1699 Die Betriebsanweisung Seite 6

ENGLISH
7. Lock symbol
8. "Defrost by weight/time" symbol
9. "Grill/Comb" symbol
10. "Convection" symbol
11. "Microwave" symbol
12. Auto cooking mode symbol
Broiling rack
13. Coupling
14. Clamps
15. Accessory for removing the broiling rack
Remove the package and accessories from the operating chamber. Check the oven whether there is deformation or not. Pay
special attention to the door state. If there is some problem do not set and do not switch on the oven.
Protective covering
Case: if there is protective covering on the case, remove it.
Do not remove light grey mica plate inside the operating chamber; it serves to protect the magnetron.
Setting the glass tray
1. Set the glass tray support (b) in the opening situated on the bottom of the operating chamber.
2. Set the roller ring (c) on the bottom of the operating chamber.
3. Carefully set glass tray (d), by matching ledges and grooves of the support.
Never set the glass tray with its bottom upside down. Do not prevent rotation of the glass tray while operating the oven.
During cooking always use glass tray and tray support.
Products and cookware should be always set only on the glass tray.
The glass tray can rotate clockwise/anti clockwise. It is normal.
If cracks or chops appear immediately replace the glass tray.
Setting
1. Select even stable surface to set the oven, provide proper ventilation of the oven.
(1) Set the oven leaving at least 7-8 cm of space behind and on the sides of the oven and 30 cm of space above
the oven.
(2) Do not remove supporting legs from the bottom of the oven.
(3) Do not block ventilation openings on the microwave oven case.
(4) Place the oven away from television and radio receivers in order to avoid interference while reception of tele-radio sig-
nals.
2. Before connecting the microwave oven make sure that operating voltage and power correspond to voltage of the wall
outlet. Connect the oven to the wall outlet with secure grounding.
NOTE: Never place the microwave oven on the heating surface (stove) and other heating sources.
If the microwave oven is out of order due to owner's actions, the owner is deprived of rights for warranty service
and repair.
During operating the surface of the microwave oven can get hot. Avoid touching the heated surface in order to
prevent risk of getting burnt.
USAGE
Microwave oven operation and its functions
1. Current time setting
Switch on the oven. 0:00 will appear on the display and sound signal will be heard.
• Press "ЧАСЫ/ПРЕДУСТАНОВКА" (Clock/Preset) once or twice to select 12-hour or 24-hour time format.
• Turning the "Время•Вес•Авто меню" (Time•Weight•Auto menu) knob clockwise/anticlockwise set hours in between
0 - 12 or 0 - 24 depending on the chosen time format;
• Press "ЧАСЫ/ПРЕДУСТАНОВКА" (Clock/Preset). Digits indicating Minutes will start flashing.
• Turning the "Время•Вес•Авто меню" (Time•Weight•Auto menu) knob clockwise/anticlockwise set minutes in be-
tween 0 - 59 depending on the chosen time format;
• Press "ЧАСЫ/ПРЕДУСТАНОВКА" (Clock/Preset) to finish, the preset time will be displayed and dots will be flashing (6)
it means the proper setting has been made.
Note: if you press the "СТОП/ОТМЕНА" (Stop/Cancel) button during the setting or if you do not press any key for 15
minutes the indicator will return to the initial settings.
1699.indd 6 1699.indd 6
6
12.03.2007 16:51:42 12.03.2007 16:51:42