Combination Nozzle - Philips FC8919 Bedienungsanleitung

2 To disconnect the tube from the ComfortControl handgrip, hold the
handgrip with one hand. With the other hand, press the tube release
button (1) on the telescopic tube and pull the tube off the handgrip
(2).
Note: This vacuum cleaner has been fitted with holes at the end of the bend.
These holes may prevent objects from getting stuck or damaged when you use
your vacuum cleaner without the tube or accessories supplied.
3 Adjust the length of the telescopic tube in such a way that the
flexible hose connection is at hip level.
4 Hold the tube at an angle of 45° to the floor.
45°
Combination nozzle and hard floor nozzle
1 To connect one of the nozzles to the tube, press the spring-loaded
lock button on the tube and insert the tube into the nozzle. Fit the
spring-loaded lock button into the opening in the nozzle ('click').
2 To disconnect the nozzle from the tube, press the spring-loaded lock
button on the tube and pull the tube out of the nozzle.

Combination nozzle

The combination nozzle can be used on either carpets or hard floors.
1 To clean hard floors, push the rocker switch on top of the nozzle
with your foot.
The brush strip for cleaning hard floors comes out of the nozzle
,
housing.
English
9