Dispensing Coffee; Programming The Quantity Of Coffee In A Cup; Dispensing Hot Water - Caffitaly System S06HS Bedienungsanleitung

• Raise the lever to open the capsule compartment (Fig. 1).
• Insert the capsule, pressing it gently into place (Fig. 2).
• Close the lever fully (Fig. 3).
• Place a cup or espresso cup under the coffee dispensing spout (Fig. 9).
• Press and release button A or B, depending on the desired coffee.
• The pressed button will blink. The machine will stop dispensing on reaching the
programmed quantity and emit a beep.
• Raise the lever to eject the used capsule into the drawer (Fig. 1).
• Close the lever (Fig. 3).
NOTE: the quantities of coffee dispensed can be programmed according to
personal taste and the size of the cups or espresso cups used.
To program the quantities, please refer to ch. "Programming the quantity of coffee
in a cup".

Programming the quantity of coffee in a cup

• Raise the lever to open the capsule compartment (Fig. 1).
• Insert the capsule, pressing it gently into place (Fig. 2).
• Close the lever fully (Fig. 3).
• Place a cup or espresso cup under the dispensing spout (Fig. 9).
• Press and hold the desired coffee button.
• On reaching the desired amount of coffee, release the button. Now the button is
programmed. The quantity of coffee dispensed can be programmed from a minimum
of 20 up to a maximum of 250 ml.
• Raise the lever to eject the used capsule into the drawer (Fig. 1).
• Close the lever (Fig. 3).
WARNING! The tube for dispensing hot water reaches very high temperatures:
Danger of scalding! The tube must only be handled using the special rubber
grip. After each use, clean the tube with a damp cloth.
• Place a metal container under the hot water dispensing pipe (Fig. 10).
• Turn the control lever forwards (Fig. 20). Start dispensing hot water.
• To end dispensing, set the control lever back to its central position (Fig. 21).
• Remove the container of hot water.
English

Dispensing coffee

Dispensing hot water

21