Operation Method; Blower Operation - Makita BHX2501V Betriebsanleitung

OPERATION METHOD

1. Blower operation

• Hold the machine firmly during operation.
• Direct the nozzle end toward the object to be dusted and pull the trig-
ger lever.
• Fully pull the trigger lever, hold down the throttle lock button and
release finger from the trigger lever to lock the trigger lever at full throt-
tle.
• Pull the trigger lever again to release the throttle lock.
• The lower portion of the fuel tank acts as an assist handle, which
enables operation with both hands. In this case, be sure to hold the
assist handle with a right hand.
2. Dust Collection Operation
• Do not allow kerosene, gasoline, or lighted cigarette to be sucked into the machine.
- Otherwise, fire may occur.
• Do not allow foreign materials, such as large wood chips, metals, glass, pebbles, etc., to be sucked into the machine.
- Otherwise, failure may occur.
• Overfilling of the dust bag may cause its overflow toward the engine side. Empty the bag before it becomes completely full.
- Otherwise, fire may occur.
• Carry the dust bag belt on the shoulder and adjust the belt length to ensure easy operation.
• Confirm that the dust bag is not twisted and pull the trigger lever to start dust collection.
• When the dust bag is full, remove the dust bag from the machine and open the fastener to empty the
bag.
If this machine is operated with the protector oriented upwards or the main handle downwards, white smoke may appear, oil may be contami-
nated or oil may leak.
WARNING
NOTE
13