Reset To Factory Defaults - Velleman WS3080 Bedienungsanleitung

8.2 Weather forecast tendency
Symbol overview:
sunny
partly cloudy
cloudy
rainy
snow
storm
snowstorm
clear night
cloudy night
Pressure sensitivity setting:
The pressure threshold for weather forecasting can be set from 2 ~ 4hPa (default 2hPa). Areas that
experience frequent changes in air pressure require a higher hPa setting compared to areas where the air
pressure is more stable. For example when 4hPa is selected there must be a fall or rise in air pressure of
at least 4hPa to change the weather forecast icon.
Storm threshold sensitivity setting:
When a dramatic change in pressure is measured the weather icons (rain and clouds) will begin to flash
indicating a storm. Similar to the general pressure sensitivity setting it is possible to adjust the storm
threshold sensitivity form 3 ~ 9hPa (default 4hPa). When there is a pressure drop higher that the
threshold over a period of 3 hours, the storm forecasting will be activated. The clouds, rain icon and
tendency arrows will flash for 3 hours indicating the storm warning feature has been activated.
8.3 UV index
Index intensity
0 ~ 2
3 ~ 5 moderate
6 ~ 7 extreme
8 ~ 10
+
11 very high
Note: table based on average adult persons with pale skin and is for indication only. People with a
sensitive skin or children may already suffer from UV-related problems when exposed to even low UV
intensities.

8.4 Reset to factory defaults

Press and hold the
Note that the memory is also cleared.
02.02.2011
low no danger to average person
little risk of harm from unprotected exposure
high risk of harm from unprotected exposure
high very high risk of harm from unprotected exposure
extreme high risk of harm from unprotected exposure
button [c] for ±20s to reset the base station to factory default settings.
WS3080
description
10
code
green
yellow
orange
red
violet
©Velleman nv