Reset To Factory Defaults; Minimum System Requirements; Software-Installation - Velleman WS3080 Bedienungsanleitung

storm
snowstorm
clear night
cloudy night
Pressure sensitivity setting
The pressure threshold for weather forecasting can be set from 2 ~ 4hPa (default 2hPa). Areas that experience
frequent changes in air pressure require a higher hPa setting compared to areas where the air pressure is more
stable. For example when 4hPa is selected there must be a fall or rise in air pressure of at least 4hPa to change
the weather forecast icon.
Storm threshold sensitivity setting
When a dramatic change in pressure is measured the weather icons (rain and clouds) will begin to flash
indicating a storm. Similar to the general pressure sensitivity setting it is possible to adjust the storm threshold
sensitivity form 3 ~ 9hPa (default 4hPa). When there is a pressure drop higher that the threshold over a period
of 3 hours, the storm forecasting will be activated. The clouds, rain icon and tendency arrows will flash for 3
hours indicating the storm warning feature has been activated.
8.3 UV index
Index intensity
0 ~ 2 low
3 ~ 5 moderate
6 ~ 7 extreme
8 ~ 10 high
11 + very high
Note: table based on average adult persons with pale skin and is for indication only. People with a sensitive
skin or children may already suffer from UV-related problems when exposed to even low UV intensities.
8.4

Reset to factory defaults

Press and hold the  button [c] for ±20s to reset the base station to factory default settings.
Note that the memory is also cleared.
9. PC connection
 The receiver can hold up to 4,080 weather data entries (with date and time) in its internal memory. This
memory is non-volatile (EEPROM) and will be preserved in case of a power failure (e.g. battery
replacement). When memory is full, the oldest data sets are overwritten.
 It is possible to read, copy, store and print this memory data by connecting the receiver to a PC (not incl.)
running the appropriate software.
9.1

Minimum system requirements

 operating system: Windows XP, Vista, 7, 8
 web browser: Internet Explorer 6.0 or higher
 processor: Pentium III, 500MHz
 memory: 128MB (256MB recommended)
 CD ROM drive + free USB port
9.2 Software installation
1. Place the included CD ROM into the reader of a suitable computer. Do not connect the receiver yet.
2. When the auto-run feature on the PC is enabled, follow the instructions on the screen. If not, open the
drive, locate the file setup.exe and double click it.
Note: make sure you are logged on to the system with an administrator account when installing or running
the software.
3. Select the installation language and click next.
V. 02 – 21/01/2015
WS3080
description
no danger to average person
little risk of harm from unprotected exposure
high risk of harm from unprotected exposure
very high risk of harm from unprotected exposure
extreme high risk of harm from unprotected exposure
10
code
green
yellow
orange
red
violet
©Velleman nv